/site/profile/

	Commit message (Collapse)	Author	Age	Files	Lines
*	Update all_in_one_pe_2015_2.pp	Philip Morrison	2016-02-14	1	-1/+1
\| \| \| \|	Shouldn't this be profile::git_webhook as in all_in_one_pe.pp since the abstraction logic is located there? Either that or the profile::zack_r10k_webook is missing from the location specified?
*	Fix hostname on role creation curl command	Nick Walker	2016-01-12	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \|	Prior to the this commit, if you were using the code_manager profile on a split install it would incorrectly try to curl the NC api on the master node. After this commit, it should correctly curl the hostname of the NC This has no impact on the functionality of the code on a monolithic PE installation.
*	Move hiera_config to main section of puppet.conf	Nick Walker	2016-01-06	1	-1/+10
\| \| \| \| \|	If it is in master instead of main then puppet apply will give a warning.
*	Add an exec to create the Deploy Environments RBAC Role	Nick Walker	2015-12-28	1	-1/+23
\| \| \| \| \| \| \| \| \|	Prior to this commit there was a requirement for the user of this repo to create a RBAC role in order for code manager to work. After this commit an exec statement will curl the RBAC API to create the role one time and hopefully it works otherwise the exec will not run again.
*	Add functionality to disable the zack/r10k webhook	Nick Walker	2015-12-21	2	-0/+15
\| \| \| \| \| \| \| \| \| \| \|	Prior to this commit, if you upgraded from a previous version of the control-repo both code manager and zack/r10k webhook would be running and ready to receive data. This can present problems if the webhook isn't disbled in the git management system is sending data to both receivers. This commit adds rudimentary ability to break the zack/r10k webhook so it can't receive data.
*	Create profile::git_webhook to abstract away the details	Nick Walker	2015-12-21	5	-4/+15
\| \| \| \| \| \| \| \| \| \| \| \| \|	Prior to this commit there were two possible webhooks - zack/r10k webhook - code manager I moved these two profiles under git_webhook and choose the correct one based on the version of PE being used. As a safety hatch, I provide the $force_zack_r10k_webhook param on profile::git_webhook in case someone needs to continue using it instead of code manager.
*	Move hiera.yaml to avoid file-sync overwriting it	Nick Walker	2015-12-18	1	-1/+19
\| \| \| \| \| \| \| \|	File sync appears to sync everything in the $codedir which inlcudes hiera.yaml. When managing hiera.yaml with puppet code you don't want file sync to overwrite its contents. So, I'm moving it out of $codedir and removing the original hiera.yaml to avoid confusion for users investigating later.
*	Final steps to make Code Manager work	Nick Walker	2015-12-18	5	-33/+69
\| \| \| \| \| \| \| \| \| \|	- Moved ssh key generation and git deploy key out of the puppetmaster profile and into zack_r10k and code_manager - Swapped code manager into the all_in_one role - Made a 2015.2 all_in_one role if users prefer to use it - Conditionally move all existing code out of environmentpath to allow file sync to sync files - Update the README to compliment the new puppet code
*	Chown files in codedir to pe-puppet	Nick Walker	2015-12-09	1	-0/+6
\|
*	Allow disabling authentication on code manager webhook	Nick Walker	2015-12-09	1	-3/+12
\|
*	Allow code_manager profile to not error out on first run	Nick Walker	2015-12-09	2	-4/+43
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Prior to this commit, the code manger profile could not complete on the first run because the file function would error out I implemented a new version of the file function that returns nothing when the file does not exist instead of erroring out which allows me to gate creating the webhook on whether there is content in the file. As a result this means that it takes 2 runs to get everything setup but this is preferable over having to manually intervene in some other way if the token file doesn't exist.
*	Refactor puppetmaster and zack_r10k_webhook	Nick Walker	2015-12-09	3	-30/+12
\| \| \| \| \| \| \| \| \| \|	Moved the webhook resource out of puppetmaster and into zack_r10k to support exchaning code_manager in place of zack_r10k As a result I cleaned up some unnecessary parameters. Installing both the r10k webhook and the code_manager at this time for testing
*	Add support for code manager which will replace zack r10k	Nick Walker	2015-12-09	4	-1/+86
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Add pltraing-rbac module Added a new profile for code_manager that: - creates a service users for code manager - creates a token for that service user - creates a hook on a git server using the token Turns out that the file function in puppet cannot read files in /root. The pe-puppet user needs read permissions on the file and traversal on the directory which giving to /root would probably be a bad idea. So, I just put the file containing the token in /etc/puppetlabs/puppetserver since I'm not sure where would be better.
*	Add custom functions for determining some PE settings	Nick Walker	2015-11-25	2	-0/+17
\| \| \| \| \| \|	Added a function to find the hostname and port of the classifier Added a fucntion to return all puppetdb hostnames
*	Merge branch 'production' of https://github.com/npwalker/control-repo into ↵	Nick Walker	2015-11-24	10	-0/+205
\|\ \| \| \| \| \| \|	merge_npwalker_control_repo
\| *	Change owner/group to pe-puppet for hiera module	Nick Walker	2015-11-17	1	-2/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	When the owner / group was root this meant that enabling hiera-eyaml wouldn't work properly as the keys couldn't be read by puppetserver. Changing to pe-puppet should resolve the issue.
\| *	fixing a bunch of puppet lint warnings	Nick Walker	2015-10-30	3	-10/+10
\| \|
\| *	Refactor webhook profiles into one profile with a parameter	Nick Walker	2015-10-30	4	-30/+24
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Previously there was a mcollective and no_mcollective version of the webhook profile. They were almost identical so I merged them and manage the difference with a "use_mcollective" parameter. I renamed the webhook profile to zack_r10k_webhook.
\| *	Change the zack/r10k webhook to utilize username and password	Nick Walker	2015-10-30	3	-6/+24
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	To accomodate generating random usernames and passwords, I had to parameterize the profiles which I didn't feel great about but I also didn't want to have to put the username and pass in hiera.
\| *	enable SSL on the zack/r10k webhook	Nick Walker	2015-10-29	2	-2/+2
\| \|
\| *	Add $::fqdn to post receive hook title	Nick Walker	2015-10-28	1	-3/+3
\| \| \| \| \| \| \| \|	Also, change other references of $fqdn to $::fqdn
\| *	disable SSL on the zack/r10k webhook	Nick Walker	2015-10-28	2	-2/+1
\| \| \| \| \| \| \| \| \| \|	The abrader/gms provider for gitlab doesn't support disabling ssl verification but will soon.
\| *	enable ssl on the webhook	Nick Walker	2015-10-28	2	-15/+17
\| \|
\| *	make environment timeout setting refresh the puppet master service	Nick Walker	2015-10-26	1	-0/+1
\| \|
\| *	Fix the update-classes script and set appropriate perms on it	Nick Walker	2015-10-26	2	-1/+2
\| \|
\| *	Fix some embarassing typos	Nick Walker	2015-10-26	1	-1/+1
\| \|
\| *	Configure the MoM to update the classifier after deploying code